Ana içeriğe geç

Repairs for a broad range of sound-generating equipment including speakers, sound bars, and speaker components.

2702 Soru Tümünü görüntüle

Why does my subwoofer start to make a rumbling sound at high volumes

I have a cowin ark 4.1 speaker and have been using it for little over a year now. it was working perfectly but i have recently started to hear the subwoofer rattle at high volumes ? any idea on how to fix this? i have emailed cowin 3 times and they never responded

thank you

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

It sounds like a small tear in the speaker cone. It will be visible. Remove the cover to inspect. If it is a small tear, you can probably repair it with rubber cement. If larger, you will need to replace the cone.

Good luck,

Russ

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle
En Yararlı Yanıt

Typically rattles at higher volume are indications of a problem with the cone not moving properly. This can be a tear in the cone, a rip in the surround or a problem with the spider. The surround is the foam piece around the edge. The spider is the part near the magnet that holds the cone in place. If the cone does not move up and down properly, it will hit the side and cause a rattle. The bottom line here is that the actual speaker requires attention.

Dan

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

arkt0m sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 19

Son 30 gün: 70

Her zaman: 9,082