The PowerMac G5 is a desktop computer first produced in 2003 by the Apple Corporation. This guide will review the repair process of an Apple PowerMac G5 model number A1047 EMC 2061 from 2004. It was discontinued in 2006 as part of the Intel switch first to developers then consumers.

221 Soru Tümünü görüntüle

No monitor output even after replacing graphics card

When i try to start this computer I do have a chime but the monitor remains dark. Motherboard? I replaced the video card with an identical one to the one I took out. It is a Nvidia geforce 5200 with 64 mb of ram. I have tried more than one monitor one of which I am certain is working. This is a Dual 1.8 ghz model. Suggestions?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

If you know for sure that the second card works, there is a possibility that the AGP slot has totally or partially failed. A lessor video card may work or you may need to try a PCI video card instead of the AGP card. If you have a PCI-E slot this is the type you may need: http://old-macs.com/pages/Video_Cards/AP...

Bu yanıt yardımcı oldu mu?

Puan 3

Yorumlar:

+ The video cable could be bad (internal break) also if you used the same cable on both monitors.

tarafından

Yorum Ekle

Yanıtını ekle

judexm sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 1,077