Eşyalarını Tamir Et Topluluk Mağaza

Late 2011 model, A1278 / 2.4 GHz i5 or 2.8 GHz i7 processor.

591 Soru Tümünü görüntüle

Seçenekler

Runnig slow on battery support

The MacBook Pro I have, gets very slow when running on battery, the cursor gets really slow.

So I’ve been reading a lot and I identified my model (MacBook8,1)

I erased the plist file in the kext file that the tutorial shows.

Then when I reset the system it gets better, so I believe that I’ve fixed the problem,

BUT, when I run Serato DJ 2.0.3 off of battery power the processor gets very high processing, and with the MagSafe connector plugged in it gets down to OK.

What can I do??

I also run the app Dan said coconutBattery and shows this:

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

First I would check the battery to see how much life is left in it. Download this great free app: CoconutBattery. Paste a screenshot of the main window so we can see it here Adding images to an existing question

I would also check the energy settings within the Energy Saver control panel to make sure the settings are correct. I would enable the show battery status in menu bar setting I would also make sure not to put the disk into sleep mode when on battery given you’re running a DJ app here. I hope you’ve got plenty of son de Cuba (Buena Vista Social Club) I love Ibrahim Ferrer’s Nuestra Ultima Cita for us older folks!

Being in Cuba it can get quite hot and humid ;-} So you may need to clean out the dust buildup inside and the fan & heat sink. You may need to also clean and apply a fresh coat of thermal paste on the heatsink. As I’m also suspecting your system may be slowing down as it’s overheating.

Here’s the IFIXIT guide you’ll need to follow: MacBook Pro 13" Unibody Late 2011 Heat Sink Replacement here we are only cleaning it.

You might want to download this app: TG Pro it will allow you to monitor your systems temps so when the system slows down you can see if it’s overheating.

MacBook Pro 13" Unibody Late 2011 Heat Sink Görseli

Kılavuz

MacBook Pro 13" Unibody Late 2011 Heat Sink Replacement

Zorluk:

Orta

—

45 minutes - 1 hour
iFixit Görseli

Kılavuz

Adding images to an existing question

Zorluk:

Çok kolay

—

2 - 5 minutes

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

6 Yorum:

No, no soy cubano, ¡me encanta la música!

tarafından

Thank you Dan, I will download the apps. I already make a clean up of the MBP and replaced the thermal paste. I love music too, but I´m not the Dj, it´s a friend of mine and the MBP is his. I´ll post the photos once I download the app, the Internet in Cuba sometimes is very slow. Thank You!

tarafından

The coconutBattery App shows status Good

tarafından

Can you paste a screenshot of the main window so I can see the other data. As the cycles and the voltages are what we need to focus on.

tarafından

could this be a problem in the SMC chip??????????????

tarafından

1 tane daha yorum göster

Yorum Ekle

Seçenekler

First Try resetting the SMC, If this doesn't work then I would suggest replacing the battery. Just make sure not to buy a cheap battery off of eBay; I would recommend the cheapest battery being $40.

I replaced my old battery with this one from Amazon.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Luis Anniel sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 104