98 gmc 4.3l v6 oil pan removeal

i have alll the bolts that i can see from the bottom of the pan, but the pans still hung up i figured it would drop sorta easy with all the bolts out but there must be some i missed. where do i go from here?, take the trans out, the whole motor out?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

GIVE TOOLS. FIX FOREVER.

GIVE TOOLS.

FIX FOREVER.

Spread the Fixmas cheer.

GIVE TOOLS. FIX FOREVER.

Spread the Fixmas cheer.

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Tap it gently with a small rubber hammer all around the seam. There may be a gasket that's holding it in place. Use a flathead screwdriver on the end to break the seal loose. You can also use the back of your fist and bump it loose.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Careful wit the screwdriver that you do not bend the surface for the gasket, or you will have a leaky pan.

tarafından

Yorum Ekle

Yanıtını ekle

steven boomer sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 6

Her zaman: 1,563