Ana içeriğe geç

25 Eylül 2015'te yayımlandı. A1688/1633 modeli. Bu cihazın tamiri eski nesillerinkine benzer; tornavida ve kaldırma aletleri gerektirir. GSM ya da CMDA olarak / 16, 32, 64 yada 128 GB kapasiteli / Gümüş, Altın, Uzay Grisi yada Rose Gold (Gül Altın) seçenekleri mevcuttur.

2688 Soru Tümünü görüntüle

iPhone got a few drops of water in now lcd's wont work

my iphone 6s got a few drops of water in it , i disconnected battery and left it to dry for 3 days , switched back on , worked for a min , then lcd turned off , so i got a replacement screen tried it on another iphone 6s first , then plugged it in to the water damaged phone and no display , but the phone works , i restored it via itunes , etc can hear it ringing etc , just lcd will not work , maybe damage to motherboard , but where do i look , thanks for any help

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Shine a bright LED flashlight at the screen and boot it up to check for a bad backlight. It seems likely that your backlight fried. This is not a bad repair as far as board work goes, but not one to attempt unless you are well versed in micro soldering and have a good setup for it.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

shaz sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 31