Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1172 Soru Tümünü görüntüle

Will not power on after replacing charging port

My charging port wasn’t keeping the jack in so I replaced it. After I replaced it and put it back together, I ripped what I believe is the WiFi ribbon. In any case , my device will not power on at all. Nothing on the screen. Nothing when plugged in. Nothing when I plug in and unplug battery. Nothing. I have the part I ripped coming soon to replace. Could that be the problem? It is the small part by the speakers. Right off to the left. Any advice would be helpful.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

can you send a highish-res picture of the part you ripped and the inside of the phone?

It sounds like you are talking about the diversity antenna, but that being ripped should not prevent the phone from at least trying to boot.

There is likely something else going on.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Block Image

This

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

are you able to post a close up of the areas around the connectors in the phone?

tarafından

Yorum Ekle

Yanıtını ekle

Susan Colby sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 72