Ana içeriğe geç

A1706 / EMC 3071—Released in November 2016, this 13" Macbook Pro introduces the OLED Touch Bar. Features a dual-core "Skylake" Intel Core i5 CPU and four Thunderbolt 3 ports.

212 Soru Tümünü görüntüle

Why is my MacBook Pro getting hot?

There’s a metal component on the logic board that appears to be getting hot.

I’m not sure if it’s an issue with the heat sink.


This has started happening after I spilled liquid over the keyboard. I then opened it up and cleaned the logic board and all the parts.

I am considering replacing the I/O ports/boards.

Can anyone point out why this could be happening or what that metal component is?

I believe it’s the metal covering the RAM.

Update (08/24/2018)

Still trying to solve this one.

The RAM appears to be getting very hot.

Block Image

How do I remove the metal protectors?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Hey chrono

If water damage has occurred then you may be in the process of shorting a component out. You should take the lid off the back of the MacBook and remove all the covers from all the parts. You will need to clean and let dry al the covers and components that could have been at risk. If overheating or burning is occuring this is a part on the Logic Board being damaged.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

It’s been several months since the accident happened. Do you think the cleaning process can still be done?

Do you have any guides/tutorials on taking covers off from the parts?

Will I need to do a stronger cleaning process than isopropyl alcohol?

tarafından

Not necessarily. If the accident was minor isopropyl alcohol will work just fine, you may need to take every piece off to clean. They should be screwed in to the Logic Board itself with small torx screws.

tarafından

Thanks for your response!

Do you think it's fair to say that the heat think is working fine? Not %100 how to diagnose the heat sink.

tarafından

Yes it is, if the heat sink wasn't working right the MacBook wouldn't run since the sensors would shut the Mac down

tarafından

Yorum Ekle

Yanıtını ekle

chrono sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 346