Ana içeriğe geç

Repair and disassembly guides and support for dish washing appliances.

699 Soru Tümünü görüntüle

Whirlpool Quiet Partner III won't drain

I just reinstalled my dishwasher after it had been stored for a few years in my unheated garage.  The water inlet valve was cracked (big surprise) so I replaced it.  Now when I ran a test cycle, the water is not draining from the dishwasher.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

HI:

Could be your drain pump is bad. But sitting for a year also the filter, grinder and area could be full of debris. Here is a great site to give you ideas on how to fix your washer, As you look for a part and click on the part picture you get a video on how to replace this part, but then you can see how the unit is put together and clean your unit out. Or replace parts not working. I am guessing a stuck flap valve also could be stuck closed.

https://www.partselect.ca/Models/GU1100X...

Good luck.

Alton

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

Turns out the drain pump motor was bad.  Cleaned up the filter, grinder and flap valve.  So far, so good.  Thanks!

tarafından

Yorum Ekle

Yanıtını ekle

Lee Best sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 4

Son 30 gün: 11

Her zaman: 2,102