Ana içeriğe geç

Fourth generation of CDMA iPad 4. Available in 16, 32, or 64 GB models. Model Number A1460.

20 Soru Tümünü görüntüle

Won't finish booting after replacing display

After replacing a broken display I get an apple when doing a force restart, but it does not finish booting. Unfortunately, I thought it was fixed when I saw the apple and went ahead and stuck the display to the device. Have I just wasted a day and a display?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt


Try triple clicking the home button in case of any accessibility features have been turned on.

It is most likely a faulty digitiser or it could be damaged due to squishing the ribbon cable between the iPad metal housing and digitiser.

Sometimes not plugged in fully if lucky, worst case is the connector for the touch screen being physically damaged.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

By plugging it in I now can get to the passcode entry point, but the touch screen does not accept any touch inputs.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Steve Mossbrook sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 38