Ana içeriğe geç

The DuraForce PRO is a Verizon rugged smartphone released in October 2016, that is built to be water/dustproof and screen shatterproof. This phone also has a removable battery (note that removal of battery will void the warranty) and many other parts. Model numbers: E6810.

10 Soru Tümünü görüntüle

How to re-adhear rubber covers to top and bottom of Battery Door.

What adhesives and/or techniques would you use to get the rubber covers of the Kyocera DuraForce Pro’s Battery Door to sit flush and clean looking? I’m not really a cellphone repair guy, so this one has been giving me trouble.

Block Image

While you’d think the rubber nipples that feed into the holes on the battery door would make things easier… They actually seem to make it more difficult to sit entirely flush. Leaving bumps or bubbles, as if the rubber cover wasn’t sized properly.

My best guess would be rubber cement for the adhesive. But I’d need a lot of working time to wiggle the rubber covers into the holes to make it sit flush.

Any suggestions on tools, techniques, or anything else to make this task easier?

Thank you.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:

Although the ambition is admirable, I’ve found that re-gluing them yields a disappointing result. I just bought a new cover on ebay for $3. Cyanoacrylate glue can work, but it won’t come out pretty.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Justin Krueger sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 219