Can anyone diagnose most likely failure, maybe electronic, if H2O fills but doesn’t wash? Shorting the lid switch wires doesn’t work. Breaker not tripped. No spin or drain either; washer giving total silent treatment!
Thanks for any help.
Bu iyi bir soru mu?
İtibar: 687,9b
3,6b
1,1b
2,6b
Cause 1
Line Fuse
The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 1
Son 30 gün: 2
Her zaman: 139
1 Yorum
@dnagofer what is the exact model number for your washer?
oldturkey03 tarafından