Ana içeriğe geç

Model A1312 / Mid 2011 / 2.7 & 3.1 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac12,2

708 Soru Tümünü görüntüle

Need iMac power supply voltage pinout. Short fan spin then dies

Hi guys,

I’m working on the 2011 27” imac and it gets no power.

  • I only get Diagnostic LED #1 on
  • When I press the power button, I get momentary fan spin then it stops
  • I don’t know what the power supply pin voltages are supposed to be, but out of the 14 or so pin points, I only get a measurement from TWO : 12v and 3.9V

The customer has also reflowed this unit due to the GPU problem, but would the GPU prevent the machine from getting boot power?

Hoping someone can provide the power supply pinout voltages so I can see if it’s logic board vs PSU. Thanks!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Not sure if this will have what you need but this is suppose to be the schematics for it: https://www.scribd.com/document/27449012...

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

KRepair sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 156