Ana içeriğe geç

1.4GHz or 1.6GHz Processor / 64GB or 128GB SSD

162 Soru Tümünü görüntüle

Will not charge replaced battery and IO board

I have a 11” MacBook Air.

It was just on my desk for maybe about a year without using. Decided to pull it out one day and charge it. It did not charge. No lights at all. I bought a replacement battery thinking it’s the battery. Was able to finally turn it on and then I tried to charge it. Still not light. I went to Apple store and they said they cannot service it because i have a third party battery. But he said it’s mostly likly the I/O board. Went here to purchase a replacement I/O board. And still will not charge. SMC and PRAM were both reset. I just used the last juice in the replacement battery. I don’t know where to proceed from here . Any suggestions?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

2 Yorum:

What was the mag-safe adapter light doing?

Apple would not help you with it anyway as it is over six years old. Reminds me of an old military joke about officers. Do you know what that little white speck on the top of a pile if chicken sh*t is? That chicken sh*t too, So is Apple.

tarafından

Nothing, except of a VERY dim green light. I tried 2 chargers, both are known to be in working order

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:

Dim MagSafe LED is a sign the charging/power logic on the main logic board is having problems.

The cause can be caused by a liquid spill damaging the TPS 51980 Buck Converter which is on the top side of the logic board (hidden side). Marked in Black here

Block Image

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Alan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 129