Eşyalarını Tamir Et Topluluk Mağaza

LTE-enabled variant of the fifth generation of iPad, released in March 2017. Available with 32 and 128 GB storage options featuring a 9.7" Retina display and 64-bit A9 processor.

46 Soru Tümünü görüntüle

Seçenekler

Apple Logo shows for 5 seconds then shuts off after digitizer change

I changed the display, home button, and rear camera on an iPad 5 and now when I turn it on, the Apple logo comes on for 5 seconds then goes away and only the backlight stays on.

I have taken the device back apart several times to make sure that all the connections are clean and properly plugged in, but it still acts like this.

What am I missing or where do I go from here?

Everything worked good on it when it was brought to me, minus the digitizer being broken..

Thank you.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0

2 Yorum:

What happens when you use the original digitizer?

tarafından

That is not an option since the original is in about 1,000 pieces.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

I suspect you have received a faulty or low quality digitizer. I would try another digitizer just to be 110% sure. If a new digitizer doesn’t fix anything; I suspect it’s a Logic Board issue.

iPad 5 Screen Digitizer

iPad 5 LTE Front Panel Assembly Replacement

iPad 5 Screen Digitizer Görseli

Ürün

iPad 5 Screen Digitizer

$44.99

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

I will throw a different digitizer on tonight when I get off work.

Thank you.

tarafından

Yorum Ekle

Yanıtını ekle

sunruh sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 74