Ana içeriğe geç

Her şekil, boyut ve renkteki Android telefonlar için tamir ve söküm bilgileri.

33192 Soru Tümünü görüntüle

Connect data wires of USB cord to phone

I have a soft bricked phone (mtk chipset) and unfortunately charging port is broken …i am not a electrician but I have a USB cord with 4 wire (red,black,green and white ) I know where red and black wire should be connect on phone battery pins but I am facing problem with White and green which are for data (+ and - ) so anybody here who can help me ??? Please reply ….(am using battery pins for flashing since I saw some people doing the same )thank you

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

http://pinouts.ru/PortableDevices/micro_...

Are you asking about connecting the charger data pins to the battery??? They connected where the charger port is broken. You’d have to solder them on.

Bu yanıt yardımcı oldu mu?

Puan 0

24 Yorum:

No I meant pins from where battery are connect (back side of phone )

tarafından

Ok. It’s still unclear what you want to do. I’ll make it simple...

Your charger port is broken on the logic board,correct? If so,you must replace the port or connect the wires directly to the board. I can take pictures of an example if you’d like... I’d like to help you

tarafından

When you say charging port,you do mean the part the usb cable plugs into,right?

tarafından

Yes I meant "the part the USB cables plugs into "by charging port ...and unfortunately it is broken and I don't have tools for opening and soldering it ...so I thought if it is possible to connect those USB data wires into " phone battery connectors " (those 3 or 4 golden pins we can see after removing a 'removable' battery ) .......

I thought of this method because I have seen people flashing dead phones by connecting something in those battery connectors ) thank you for replying and for your kindness

tarafından

No problem.

I honestly don’t know how that would even work. It doesn’t make sense to me. Charging the battery that way may not work correctly either. The reason there are more than 2 pins on the battery,is for the phone to read temperature of the battery,which allows it to tell if it’s overheating and slow down the charging current. Sometimes the 4th is for ground(in case of a surge). This is what I’ve heard. But the data pins for the battery shouldn’t have anything to do with the data in the phone.

Now,is the charging port not working,or did it pop off?

Where did you hear of people using the battery pin connectors like this? Maybe they were using them to charge the battery if the phone wasn’t charging it,but maybe the micro usb data pins worked??? So maybe they directly wired the power cables to the logic board battery pins?

I stay up late(5:40am here now). I will reply again if I see you responded.

tarafından

19 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Vansh Santoshi sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 5

Her zaman: 900