The G4 Quicksilver came in 533MHz, 667MHz, 733MHz, 800MHz, 933MHz, And 1.0GHz speeds.

58 Soru Tümünü görüntüle

power light goes off when released

when turning g4 on the motherboard lights up,fan comes on but light on front goes off

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Unplug the machine and all peripherals. Press and hold the start button for 10 seconds. Replace the 3.6 volt lithium 1/2 AA PRAM battery on the logic board if it's been over 3 years. Plug it back in. With the door open, press the reset button on the logic board with a pencil eraser. Let us know your results or any changes. Pray.

Bu yanıt yardımcı oldu mu?

Puan 3
Yorum Ekle

Yanıtını ekle

rev frank currier sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 8

Her zaman: 971