Ana içeriğe geç

25 Eylül 2015'te yayımlandı. A1688/1633 modeli. Bu cihazın tamiri eski nesillerinkine benzer; tornavida ve kaldırma aletleri gerektirir. GSM ya da CMDA olarak / 16, 32, 64 yada 128 GB kapasiteli / Gümüş, Altın, Uzay Grisi yada Rose Gold (Gül Altın) seçenekleri mevcuttur.

2690 Soru Tümünü görüntüle

Replace iPhone 6s motherboard with iPhone se's

I've read everywhere that the iPhone se is basically a smaller version of the 6s, so if my motherboard is damaged (6s) is it possible to replace it with one from the iPhone se? I am aware there are size differences but are the parts the same?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 2
Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

No way, the two have in common the same processor and quite a big number of components, enough to have a similar performance and main characterics, but that’s all for similarities. Logic boards shapes are extremely different and not at all compatible..you could never fit an SE board into a 6s housing and viceversa.

Bu yanıt yardımcı oldu mu?

Puan 3
Yorum Ekle

you can get some of the correct ones off ifixit! https://www.ifixit.com/Store/iPhone/iPho...

whats wrong with your current one specifically?

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

I have a brand new iPhone se 3rd gen but for reasons that are best left u addressed or discussed I would like to install a working 6s motherboard and processor into the iPhone se 3rd gen. Is this possible? Thank you kindly in advance for not forcing me to state WHY I’m needing to do this, it is ridiculous but I however have promised to give my very best effort in completing this task but only of course IF the iPhone 6s motherboard’s sockets can mate perfectly with the brand new and activated iPhone SE 3rd gen’s other internal components ribbons/clips and also if there are no components with interchange coded restrictions etc…

Thank you kindly for any expert and professional or accurate information that you can offer.

Blessings to you.

Bu yanıt yardımcı oldu mu?

Puan 0

3 Yorum:

no, and the 6s board is wayyyyy older(by about 8 whole years!) , meaning there's no way the connectors on the board are modern enough. and the fact that there is no interchangeable boards in between ANY iphone models, nor will there ever be i bet.

tarafından

As @timtomissus has said, there's no chance of interchange. Every single phone Apple makes has the logic board custom designed for that specific model. Each new phone model is made to hold the components for that model, to fit in the space available and connect to all the peripherals included. So even on very close models like say the 5 and 5S, there's no changing between chassis.

tarafından

Thank you guys and your answers will bring the conclusion to the thoughts of the matter.

I was pretty certain that this would be the case however I needed to reach out for some back up.

I am a computer/pc tech but I’ve not ever but done battery and screen replacements on iPhones.

Thanks again to you both for your help.

Best regards.

DK

tarafından

Yorum Ekle

Yanıtını ekle

Claire Park sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 11

Son 30 gün: 33

Her zaman: 1,321