Ana içeriğe geç

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Why is my replacement iPhone 6 display not working in ios 12?

I recently purchased a replacement display for my iPhone 6 because my old screen was bulging out. I got a new replacement screen for $18 on eBay the display stopped bulging out but the display is not turning on iOS 12. why?!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Did you fix the phone then update? This can cause the phone to brick. If the phone is working then you either damaged the screen during the repair or the screen was already faulty

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

No i updated the phone then repaired it

tarafından

It has nothing to do with iOS, it's either a faulty screen or damaged screen connector. Have you tried the old screen?

tarafından

Yorum Ekle

If your screen was bulging out, it seems more likely due to the battery swelling than the screen being faulty. Have you inspected the battery at all? It could be that it died and won’t take a charge. Also try putting the old screen back on and see if it works, and report back.

Bu yanıt yardımcı oldu mu?

Puan 0

3 Yorum:

I Bought the replacement screen and I threw the old one out

tarafından

@ryoseo2009 Without a known good screen it's difficult to really eliminate anything here. Does the battery seem swollen at all? Have you made sure the display connectors are seated correctly? You should feel a little snap when you push them in place.

tarafından

I Ordered A New Battery And I’ll See if it works and the battery felt and looked a bit swollen to me

tarafından

Yorum Ekle

Yanıtını ekle

ryoseo1020 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 57