I have an iPhone 5s which is in bad condition the back cover and the screen. So I already ordered the back cover and the screen replacement. The question is, I noticed that some screws are missing(I ordered also a set of new screws) and I want to put the new ones. How can I find the right screw? There are so many inside the screw set.
Notice: I only need the missing screws(that’s difficult for me
Bu iyi bir soru mu?
İtibar: 102,6b
10
54
291
You can use the following guide to get size and shapes of the screws..be very careful with screen flat cable connectors shield screws as you might damage the board if screws are not of the exact correct lenght. In any case don’t overtighten screws, board is not exposed to pressure, firmly is fine, forcibly is bad !
Bu yanıt yardımcı oldu mu?
İtibar: 635
6
6
1
just leave them out if everything is working. putting the wrong screw in the wrong hole can permanently damage your phone
Bu yanıt yardımcı oldu mu?
I am afraid mostly for the 4 screws(top right corner) that holding the lcd flat cables(you know :P) witch one of them in not magnetized or something like that. They say also in some vids that if you don’t put that unmagnetized in it’s hole the compass etc wont work.
I will see how it’s going to be. I hope I remember to leave feedback guys.
Thank you.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 127
1 Yorum
Can you post some pics of which screws are missing? Someone should be get the specs for you.
rokin154 tarafından