İtibar: 185
4
8
Hey i Got an iphone 7 After i did a audio IC reball it dident start up. when i restore it it is stuck at ‘‘updating SE firmware. i reballed baseband and all the chips on the left side of the board. I use a heating plate so this can be done without hurting the pmic or the CPU. i still got this error. There are no shorts in the circuit.
Anyone experienced this before?
Bu iyi bir soru mu?
İtibar: 159,7b
11
191
368
Did you do the jumpers for the few pads that have a weak connection under the audio IC? This is needed for a permanent fix for audio IC fault.
Bu yanıt yardımcı oldu mu?
thanks ben, but thats not the problem. i,m aware of the jumpers.
Does any one know how to fix this without taking the whole mobo apart and removing the base band and $@$* likethat or should i let some one repair it just give me a quik and simple answer
Bu yanıt yardımcı oldu mu?
That's not a modular part replacement repair, you'll need a Pro to get it fixed.
i have same problem
but when i update get error -1 with 3utools
80% software take
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 3
Son 7 gün: 5
Son 30 gün: 29
Her zaman: 2,710
1 Yorum
I have same problem with iPhone 6S Plus that has drop to the fall and always restart.
Sommas Prabpan tarafından