Ana içeriğe geç

Sony Computer Entertainment tarafından üretilmiş bir oyun konsolu. PS4 olarak da bilinir. İlk olarak 20 Şubat 2013'de duyurulmuş ve 15 Kasım 2013'te satışa sunulmuştur.

1690 Soru Tümünü görüntüle

Optical drive no power

Hello, I fixed the optical drive roller which was misplaced to fix the CD intake problem, This problem was fixed but I was still getting error with disk reading so I decided to replace the laser kit. I successfully replaced it. I restarted my PS4 but no activity in optical drive. It is not doing anything. Seems there is no power. It seems something got wrong during re-assembly. Not sure how to fix now. Any suggestion and how to check if optical drive is getting power. did any cable got bad?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:

maybe you nicked a cable going to the drive , or its a software issue

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Most laser assemblies ship with a shorting solder connection on the ribbon cable to prevent static damage. Look carefully at the cable on the optics assembly itself for a small “bubble” of solder. Remove this and the laser should work. Since the assembly won’t attempt to spin the disk unless one is detected (laser lights and detects the reflection if a disk is there), it may appear that the assembly has no power. Check for the short and update this with what you find. If you can, post a few pix of the assembly from different angles too.

Dan

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

lucknow_99 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 65