Eşyalarını Tamir Et Topluluk Mağaza

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

My iPhone4 doesn t work after lcd replace

Dear guys,

i had this problem: i replaced display and touch screen on my iphone 4 and saw all was good but after some hours i tryed to use charger and i had bad surprise: charger don t recharge battery and if i try to attack it to my computer it don t find it. So i tried to replace the dock connector and no luck, tryed to change cable , charger and battery and again no luck :(. So in your opinion what is the problem? what happened?

Best regards

Dan

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0

1 Yorum:

Does the home button work?

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Most Likely you did something wrong when you replaced your display, did you mess with anything else BUT the screen when you replaced the display ? Try backtracking on what you did and reassemble your phone and try it again, you never know it you dont try.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

i tryed many time to reassemble it but no luck, i tryed also to use a recharger not apple and show the message "this charger it s no original" but not recharge too :(. Don t know what to do now.....

tarafından

Yorum Ekle

Seçenekler

My experience says it can be the kabel of the charging port

it is fragile

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

4 Yorum:

i tryed to change the charging port connector but no luck

tarafından

That one [bağlı ürün eksik veya kapalı: IF182-009]

tarafından

yes that one

tarafından

i change display and all partsin my job and today the same problems. i changed display and touch screen on iphone 4 and after to have plugged and unplagged display into his socket in logic board the same problem. all the phone work right but it s impossible recharge it. Do exist a block that close the charge if some1 replace display many time or i m just unlucky?

tarafından

Yorum Ekle

Seçenekler

did you make the connector the battery plugs into loose ?

http://www.iphonecentral.us/iphone-repai...

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 5,036