Ana içeriğe geç

Model A1312 / Mid 2011 / 2.7 & 3.1 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac12,2

708 Soru Tümünü görüntüle

Software on new harddisk

My harddisk on my iMac died, so I replaced it with a new compatible one. But now I have no idea what to do software-wise. Do I need an adapter to upload a OS-version to it first, before installation, or do I upload the software after the installation of the harddisk?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

FYI - You'll also need this with your new drive: OWC In-line Digital Thermal Sensor for iMac 2011 Hard Drive Upgrade

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Once you get the hardware side of things working you’ll need to create a bootable OS installer drive. I would recommend staying with Sierra on your system, here’s what you’ll need to do from a second Mac system How to create a bootable macOS Sierra installer drive. If you have a good internet connection you could try the OS install from the internet How to start up your Mac in Internet Recovery Mode. As you have a fresh drive you don’t have the recovery partition to work off of.

Bu yanıt yardımcı oldu mu?

Puan 1

2 Yorum:

OWC thermal sensor

tarafından

@mayer - For sure!

tarafından

Yorum Ekle

Yanıtını ekle

makkenic sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 57