I’m trying to remove the control module for a Bosch SHP65T55UC/02 dishwasher and I cannot figure out how to remove it. I have the door separated and after slightly bending the 5 top clips back it still won’t budge. Any help would be appreciated!
Bu iyi bir soru mu?
İtibar: 67
3
the side with the five clips is not the side the control panel is released from…the control panel together with the facia plate is released from the door by undoing the 3 torx 20 screws in the handle (top of recess). once the control panel and facia plate are removed from the door assembly the release tabs highlighted in the attached photo can be accessed...these clips are facing the exterior front panel…lift the clips while gently pushing the panel down (towards the bottom of the machine) and the control panel will fall away from the facia plate.
Bu yanıt yardımcı oldu mu?
I have this machine. Does anyone know where the thermal fuse is located ?
İtibar: 448,9b
11
366
1,4b
Hi @jasons1969 ,
Don’t know if this is a help or not but here’s a link to the parts for your dishwasher.
Scroll down the parts diagrams on the left of the page to find the “base assembly” diagram, click to enter and then hover your mouse over the parts diagram to find part #0510 which is the control board.
Hopefully you may be able to work out how it is held in from the diagram.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 1
Son 7 gün: 7
Son 30 gün: 28
Her zaman: 1,143
