Eşyalarını Tamir Et Topluluk Mağaza

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Seçenekler

no display on iPhone 6

hey guys, i replaced screen/digitizer on iphone 6. all good. i carefully put it into a REALLY tight cover. all ok. few days later i had it out to show that cover. that night was in a hurry and kind of mashed it into that cover. never lit up again. it had a very dim light, no display, just very dim. i ordered another screen/digitizer but still the same. this cover is very good, just really dam tight getting it in. what could i have done to disconnect this display.?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Unless the cover is so tight it can bend the iPhone housing, it might be just a coincidence too. When lifting the connectors for replacement it may happen to damage components surrounding them. Issue might be related to the backlight circuit as well as a damage to your new screen. If you still have around the old one I’d try the replacement to check first if it’s a screen damage. If it’s not a screen damage it would probably be on the board itself and would require microsoldering skills.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

john sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 32