Eşyalarını Tamir Et Topluluk Mağaza

Repair and disassembly guides and support for the Digital SLR line of cameras by Canon, including the Eos series first introduced in 1987.

759 Soru Tümünü görüntüle

Seçenekler

My Canon EOS-1Ds Mark II won't turn on

I haven’t used my Canon EOS-1Ds Mark II for about 6 months. It was working perfectly before I put it away.

I put in a battery in the camera, it cannot be turned on.

It has different behaviors when I try to turn the camera on with different batteries.

  • Old Canon original battery (measured 12.6V) - the top screen flashing an empty battery.
  • Relatively new 3rd party battery (measured 13.4V) - nothing happened.
  • Canon DC Coupler with Adapter (measured 13.4V) - nothing happened.

Any ideas?

Thanks!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Pull out the battery unit and on the top wall of the chamber is a small CR2025 battery which holds your settings. I would replace it.

Depending on how often you’ve recharged the battery packs they be worn out. What does the charging dock unit tell you the batteries condition?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Thanks Dan,

I try with a new CR2025 battery but still do not work.

I know the condition of my NP-E3 battery is not good but the Canon DC Coupler with Adapter should be in a good working order.

The odd thing is that using a lower voltage battery (12.6V) the camera showed an empty battery, using a higher voltage battery (13.4V) or DC Coupler with Adapter (13.4V) the camera showed nothing.

tarafından

Yorum Ekle

Seçenekler

How did you fix this? My camera has the same problem.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Hsu sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 7

Her zaman: 956