Eşyalarını Tamir Et Topluluk Mağaza

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

330 Soru Tümünü görüntüle

Seçenekler

iMac not booting, reboots after login

We have a iMac EMC 2546 in repair. The iMac boots and goes into the login screen. After we enter the password the iMac tries to login but halfway through the loading bar it stops and reboots automatically. It also reboots automatically if we try to enter the Recovery mode (normal & internet) and safe mode.

We have tried a PRAM & SMC reset. Swapped the memory. And even tried another HDD and SSD. We also ran a hardware diagnostic with the D button on start up and both the short as well as the long test gave no errors.

After that we made a OSX install USB drive with Mojave. But this also automatically reboots at the end of the progress.

Is there something we are overlooking with this kind of error? Thanks in advance!

The person who this iMac belongs to got this error message (see picture) but we never got that error over here.

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Restart your iMac in Target Disk Mode holding the T key.

If the system is stable lets access the systems error log. Using a second system connected via a Thunderbolt cable between them boot up your working system holding the option key, then select the other Mac’s drive to boot from. This should work and you should then be able to access the crash reports via the Console app. Copy off the last crash report and post it here as a PDF file.

References:

● Mac startup key combinations

● Use target disk mode to move files to another computer

● Understanding the Applications for Target Disk Mode

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

Thanks for your reply. We sadly do not have any other Mac device available to try this option with. I also tried to boot the device in single user mode but this also does not work (automatically restarts)

tarafından

Does the system at least stay up when you put it into Target Disk Mode? Do you see the Thunderbolt Icon floating on the screen?

At this point you'll need to try booting up using an external drive does that work?

tarafından

Yorum Ekle

Yanıtını ekle

Koen sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 71