Ana içeriğe geç

4 Kasım 2017'de satışa sunulmuştur. Model A1865, A1901. GSM ya da CDMA olarak 64 ya da 256 GB kapasitelerinde, Gümüş ya da Uzay Grisi renklerinde satılır. ("iPhone 10" olarak da telaffuz edilir.)

1196 Soru Tümünü görüntüle

iPhone X no power.

Hello everyone.

I have am iphone X qualcomm that would not power.

When i hook up only the top layer of the pcb to dcps, the top layer draws current before prompt to boot. But i tested with a DMM and found no shorts on PP_VDD_MAIN and PP_VDD_BOOST.

now i wonder what other lines could draw current before prompt to boot.

Any help is appreciated.

THANKS.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

Are you sure your power squid is good?

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

How much current? It’s not like there is some main switch on the logic board that cuts all the current to the components.

Take a look at the schematic and the moment a battery or a USB power source is connected, quite a few components receive VDD_MAIN. There is a line called PP1V8_ALWAYS and as the name suggests…it is always on.

So if the board is still dead, focus on all of the subsystems powered by the PMIC to see if there are any shorts or related issues. They may be the cause of your problem.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Use this as a reference https://www.youtube.com/watch?v=nuZz_D1u...

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Abdulmajid Mubarak sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 292