Ana içeriğe geç

Repair guides and support for motorcycles manufactured by Suzuki Motor Corporation.

127 Soru Tümünü görüntüle

Slipping after I been riding for 20 mins and it heats up

Okay so i have a 1995 rf900r and kts been running fine until recently.. Now when i first start the bike and ride it will run through all the gears fine but after 20 minutes or so no matter what gear im in if i apply too much throttle the bike will just rev and not take off .. However if i apply the throttle slowly i runs fine in all the gears this is only happening after the bikes been running for 20 minutes or so its my first bike and im not sure what it could be please help….

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Clutch pack is probably on its way to used up. You should find someone with right tools and expertise to replace it. You could also acquire the tools and knowledge to do it for yourself if you are willing to learn why the shops charge so much to do this job. A second possibility is that there is not enough freeplay (or maybe even no freeplay) in the clutch actuation mechanism and that is causing the slippage as the clutch pack heats up to (and probably beyond in your case) operating temperature. A simple adjustment might restore the clutch to normal operation but don’t expect it to last forever if such an adjustment “fixes” it. All the burnt lining contamination in the oil is not very good for the rest of the internal parts… stopping up oil filters and impeding oil supply is a big concern. Or maybe you have this problem… https://www.youtube.com/watch?v=D-KThaAZ...

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

Hi,

To add to the answer, here's a link to the service manual which may be of some help.

tarafından

Yorum Ekle

Yanıtını ekle

Phil S sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 48