Ana içeriğe geç

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

631 Soru Tümünü görüntüle

Replacing my LCD and Digitizer but screen won't show Apple logo

Hello! I am repairing the LCD and I plugged it in to test it but when I turned on the device, the light on the back and around the LCD turns on bright like normal but the LCD remains black. I can’t see a dim Apple logo. When I press the home button or the power button, it turns on showing me that it booted. I place the old LCD to make sure it isn’t the board and it works normal minus its very colorful lines haha.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Comment

That was exactly the problem. I was sold an iPad mini 2 thinking that it was an iPad mini 1. Thank you!


Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Double check the model of your iPad to the replacement screen because it could be that a iPad mini 1 LCD is being installed into a iPad mini 2 which are incompatible.

E.g the model number printed at the back of the iPad is something like A1XX.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Fredrick Rios sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 32