Ana içeriğe geç

An expansive variety of repair guides for electronic gear, ranging from home and car audio to calculators.

26242 Soru Tümünü görüntüle

Phone fell in water

So i droped my phone in water and its honor play there was no sound and there was headphone icon so i grabed that thing you clean your ears and cleaned headphone jack and there was red paint/liquid on it is it really bad phone works like it worked before

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
2 Yorum

@onespray let us know the exact make and model of your phone

tarafından

its honor play

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

@onespray the very first thing you want to do is to not try to restart the phone. This may further damage your phone. You also do not want to try to charge it any further. The next thing to do is to clean it. Completely disassemble your phone. Once it is disassembled, you do need to clean it properly. You will need high grade isopropyl alcohol and a soft brush. Use this guide to see how to clean it. Even so it was written for an apple iPhone 3G all the points are still pertinent to your phone. While you are cleaning it, check for any broken, missing or burned looking components. When it is properly cleaned, replace the battery. All these steps are to avoid delayed failure caused by corrosion. Once all this is done, reassemble your phone and reevaluate. It is most likely that all of your symptoms are only related to corrosion and short circuits.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle
En Yararlı Yanıt

The trouble with water damage is it can seem like your device is fine and then one day it just stops working. Even if it is working now until it is properly cleaned the corrosion will continue. It is possible that there is no internal water damage or at least minimal but the best way to be sure is to open the device (if your comfortable doing that) and inspect for corrosion/water damage. If corrosion is found your best bet would be to have it serviced for water damage at a local repair shop. Make sure they know what they are doing, all the shields need to be removed from the motherboard and it needs to be put in an ultrasonic cleaner. Any damaged components would need to be replaced which may require microsoldering.

Bu yanıt yardımcı oldu mu?

Puan 3

1 Yorum:

After 24hours it doesnt charge and makes some kinda beeping noise but hwn its turned off id shows charging indicator starts to beeep for like 10s turns off and agains that indicator

tarafından

Yorum Ekle

Yanıtını ekle

Eimantas Stregauskas sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 63