Ana içeriğe geç

iPhone'un 5. jenerasyonu. Cihazın onarımı basittir; tornavidalar, kanırtma aletleri ve sabır gerektirir. GSM/CDMA / 16, 32 ya da 64 GB / Siyah ya da Beyaz.

2189 Soru Tümünü görüntüle

Black tape over iPhone 4S logic board. What is it?

While refurbishing an iPhone 4S, I noticed that some tape had fallen off the EMI shield covering the Qualcomm MDM6610 chipset.

Block Image

What I initially thought was some insulating tape was actually rigid transparent film with black coating on one side that could be removed using a fingernail.

Is there any purpose to this tape such as heat dissipation or EMI protection? What is the black substance coating the film, and is there any point replacing the tape as part of refurbishment? (The film had lost its adhesiveness so can't be reattached in its present condition).

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The black tape is for heat transfer and acts like a heat dissipator. The metal shields are EMI shields.

Bu yanıt yardımcı oldu mu?

Puan 3

2 Yorum:

Thanks for your reply. What is the black substance, out of interest? Are there any handling precautions for it?

tarafından

I think it may be graphite material for acting as a heat dissipation. Otherwise it would be lead but lead can't be used when manufacturing.

tarafından

Yorum Ekle

Yanıtını ekle

John Watts sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 551