Eşyalarını Tamir Et Topluluk Mağaza

HP desktop PC. Shipped with a Socket 478 Celeron or Pentium 4. This motherboard will not take anything faster then a 533MHz FSB without throttling upgraded processors. This machine requires a new motherboard for a 800MHz FSB or higher processor.

2 Soru Tümünü görüntüle

Seçenekler

Reset to factory settings, can't connect to the internet

I reset my HP presario desktop computer to factory settings, now i can't seem to connect to the internet. Before reset, it was connected to the internet. What could be the problem ?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

A few things might be wrong:

  1. The full factory reset could have deleted your home’s WiFi password from your computer’s hard drive. This will cause the computer to be unable to automatically connect to your home’s WIFI. You may have to re-enter the password.
  2. Your system may have been left in “airplane mode” after the reset. This will block all wireless connections to your computer. If there is a small airplane icon on the right of your Taskbar, please click on it and de-select the Airplane Mode option on the pop-up menu.
  3. The driver for your Network Interface Card may have been reset to an earlier version. This will render the card unable to work properly. Please connect your computer to your router via an ethernet cable and update your NIC card.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

gemmac14@yahoo.com sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 1,238