No clicks after battery replacement

Question

MacBook Pro 13" Unibody Early 2011

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

779 Soru Tümünü görüntüle

Ettore Stramignoni @etto88

İtibar: 11

1

Gönderildi: 12 Haz 2019

Seçenekler

No clicks after battery replacement

I recently replaced both my battery and trackpad as the trackpad was not working and the battery was getting swell.

After I replaced the battery I get this problems:

Trackpad no clicks
Trackpad no touch to click
Trackpad still works with gestures, moving arrow, 3 fingers touch to search
External mouse only right click - no left click

I already tried:

Reconnecting the trackpad
Resettin NVRAM
Resetting SMC control
Deleting trackpad and mouse preferences files
Deleting general preferences files

What else can I try?

Thanks for helping!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

Yorum Ekle

2 Cevap

Seçilen Çözüm

Dan @danj

İtibar: 478,9b

Self employed contract worker

35

329

970

Gönderildi: 12 Haz 2019

Seçenekler

Take the battery back out and then adjust the clicker plate stop

It hits the switch on the backside of the trackpad which is the click action.

You also might have an issue with the trackpads placement within the uppercase. I recommend placing a few posit note sheets around the edge of the case pasting them on the edge with the free side outwards so you can remove them along all four sides this makes sure you have an even gap around.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

3 Yorum:

Ok I will try asap thanks for your help!

Anyway also the touch to click is not working. The option is correctly selected in the Mac settings though.

Ettore Stramignoni tarafından 12 Haz 2019

Remember this is a mechanical switch (red circle) If you don't hear or feel the depression then you've over done the set screw setting.

Dan tarafından 12 Haz 2019

Thank you very much Dan, you solved it!

Great!

Ettore Stramignoni tarafından 14 Haz 2019

Yorum Ekle

Ok I will try asap thanks for your help!

Anyway also the touch to click is not working. The option is correctly selected in the Mac settings though. — Ettore Stramignoni
Remember this is a mechanical switch (red circle) If you don't hear or feel the depression then you've over done the set screw setting. — Dan