Eşyalarını Tamir Et Topluluk Mağaza

25 Eylül 2015'te yayımlandı. A1688/1633 modeli. Bu cihazın tamiri eski nesillerinkine benzer; tornavida ve kaldırma aletleri gerektirir. GSM ya da CMDA olarak / 16, 32, 64 yada 128 GB kapasiteli / Gümüş, Altın, Uzay Grisi yada Rose Gold (Gül Altın) seçenekleri mevcuttur.

2688 Soru Tümünü görüntüle

Seçenekler

Corrosion on one of display ports, help fix?

I have removed and tested a screen to see if it was a faulty screen or something more. The screen worked and the phone turned on. So I powered the device off disconnected everything and placed a new screen on. However this time around it did not turn on and there were some nasty fumes but no smoke. I disconnected everything again and I noticed a white chalky compound on one of the connectors . I have provided a photo aswell but not that good quality sorry.

Is this possible to just fix with alcohol or is there something more serious

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Alcohol may help you removing dirt or liquid contaminants residues but it’s not effective when it comes to burned components and if you smelled some nasty fumes it’s quite likely you have shorted components there. From the looks of it you might have a liquid damaged board, but not sure as the level of detail of the pic isn’t sufficient to tell for sure. You would probably need a logic board repair to get the iPhone back in shape.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

4 Yorum:

Yeah so, I cleaned the board with alcohol and once I booted it back up I found out the backlight burned as I wasn't getting any backlight. Will be looking for someone locally to microsolder it back for me :/ %#*@

tarafından

That's the best you can do..hope it's just a filter as a full backlight circuit rebuild can be done but often it's an headache..

tarafından

Found someone locally charges £40 for filter and £60 for backlight circuit rebuild. Hope it's only a filter

tarafından

Well, pricing is more than reasonable, hope everything goes smooth.

tarafından

Yorum Ekle

Yanıtını ekle

David Zilvys sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 70