Eşyalarını Tamir Et Topluluk Mağaza

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 Soru Tümünü görüntüle

Seçenekler

Missing pads 1 and 8 on touch connector.

Hello everyone,

I had to remove the touch connector from the motherboard of an iPad Mini 1 and in the process 2 pads from the motherboard got removed - number 1 and 8 according to the schematic. I figured one (no.1) is for the home button and I think I know how to fix it but the other one needs to go under the CPU witch I know is not happening. There are a bunch of test points on the bottom of the board but they are not in the schematic… Can somebody with a boardview software point me to the test point I need to connect pin 8 please.

Here is a picture of a connector and the missing pins:

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

If you can’t or don’t want to invest in a tool like ZXW/FCL, then consider downloading Phoneboard and you will have most of the basic info for free. To highlight this, here are two screen shots for the pins you require from the Phoneboard application. Consider making a donation to the author of Phone board.

Pin 1

Block Image

Pin 8

Block Image

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

1 Yorum:

Thank you very much! The button started working (pad 1), I am having some trouble soldering the other one but I think I'll be able to do it. I really don't want to do these repairs but I had to do it on this one beause the connector fell apart on me...I really don't have the right equipement to do more than that...

Thanks again for the info and for the tip for Phoneboard, really appreciate it!

tarafından

Yorum Ekle

Yanıtını ekle

Dimitar Gospodinov sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 90