Ana içeriğe geç

22 Eylül 2017'de satışa sunuldu. Model A1863, A1905 olarak tanımlanıyor. GSM ya da CDMA olarak 64 ya da 256 GB kapasitelerinde, Altın, Gümüş, ve Uzay Grisi renklerinde satılır.

872 Soru Tümünü görüntüle

Water stuck in camera module

My mom recently broke her iphone 8 and decided to get a new one and I fixed the 8 and am now using it as my main driver. The phone had severe water damage and I have since replaced the screen, but water still remains within the actual camera lense on the rear part of the phone. I have taken the camera out and tried drying it with a hair dryer, but the water remains. Is there any way to fix it? Or to buy a new camera?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

If the glass lens visually looks clean on both the camera and the glass on the iPhone then the rear camera will need to be replaced.

You could try blowing some hot air on the rear camera with a hair dryer for a few seconds and see if that helps.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

If trying the dry the component with the hair dryer didn’t work then it may mean you just need to replace the rear facing camera module. You could try using some isopropyl alcohol (at least 91%) to see if that will displace the water then use the hair dryer again to evaporate the alcohol.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Riley Muir sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 923