Ana içeriğe geç

Model A1136 / 30, 60, or 80 GB hard drive / black or white plastic front

797 Soru Tümünü görüntüle

What adhesive for attaching new Click wheel/Logic board to metal frame

I am replacing the Logic Board and Click Wheel on my 80GB iPod 5th Generation (video). What is the correct adhesive to secure the grounding tabs for the logic board and click wheel to the metal frame. The adhesive that was at each attachment point has worn away.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

Thanks very much for the assist. Will the tabs properly ground to the metal framework through the double sided tape?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

@markave using some small double sided tape like this [bağlı ürün eksik veya kapalı: IF145-283] will work. Or you can just use a small piece of regular “scotch tape” to stick them on the frame. I have done that plenty of times without any issues after.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Mark Averill sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 198