Eşyalarını Tamir Et Topluluk Mağaza

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

2264 Soru Tümünü görüntüle

Seçenekler

Home button stoppend working after opening screen

I’ve got an iPhone 7 with a cracked screen and wanted to replace it with a new one. After heating up the device and trying for several times, I finally opened the device, and left it that way (I don’t have the new screen yet). Today I picked up the phone, turned it on and noticed that the homebutton and touch ID weren’t working anymore. I have not touched the homebutton or flexcables in any way, as far as I know. Could it have stopped working due to the heat?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

If you cracked the button with the heat, or accidentally nicked the cable, there is the possibility of you having broken it. Try reseating the home button connector, next try a new screen. At this point, it is already broken, so it can’t hurt to try. Apple is the only one that can fix the home buttons. Try reseating the screen cables too.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

7 Yorum:

No they dont need a new motherboard they just need to reprogramme the phone for another button pairing them up. Yes only apple can pair a new button but no it doesn't involve a new motherboard.

Other than that yes heat or damage to the flex is the cause also it might not be the button the button might have survived there could also be a possibility u damaged the flex on the screen instead and a replacement screen would fix that, so it's worth trying a new screen anyway.

Also if it's not too bad there are other people that may be able to look at the button for u and hopefully fix it.

tarafından

Up until now I have tied reseating both the homebutton connector and the screen connectors, but without result. Also, both cables don’t seem to be nicked or damaged in any way, so if possible I really think the heat has damaged the homebutton. Lastly, I will try a new screen when I’ve received it.

tarafından

How hot was the heat being outputted to the phone? Is this a hair dryer or a heatgun? If the home button area hasn't been touched I say the home button is fine because heat wasn't being directly blasted onto the ribbon cable of the home button itself.

Almost always it's just the screen ribbon cables going bad, a replacement screen will fix this problem if it's the case.

Had it happen once on an original screen after opening the phone, bad luck it seems.

tarafından

I have received the new screen assembly, and the home button works agains! So apparently something in the old screen assembly connecting the homebutton broke due to the heat.

Now one more question: when I closed up the phone I noticed a screw sticking to the earpiece. It is a very weird looking screw and I have never seen it before. Where could this come from?

tarafından

If it's not a part of the front camera assembly, I'd check the camera bracket and surrounding brackets. If it looks like a screw you've never seen before, could it possibly be a standoff screw?

tarafından

2 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Mick sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 128