Ana içeriğe geç

Model A1419 / Late 2013 / 3.2 & 3.4 GHz Core i5 or 3.5 GHz Core i7 Processor, ID iMac14,2

339 Soru Tümünü görüntüle

Fan runs faster than normal

Recently I upgraded my iMac, so I replaced the thermal paste and the hd, and I put a nvme m2 in. Now my fan runs at 2000 rpm, earlier it ran at 1200 rpm. I didn’t put any thermal sensor onto the hd. My iMac is a iMac14,2, so 27” late 2013. Do I really need the sensor as Macs fan control sees the hd’s one?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

If you replaced the original hard drive with a standard spinning disk drive, you need the OWC In-line Digital Thermal Sensor for Hard Drive Upgrade for 27" iMacs 2012 and Later

https://eshop.macsales.com/item/OWC/DIDI...

Bu yanıt yardımcı oldu mu?

Puan 3

2 Yorum:

So I would need it even if the fan isn’t raging at full speed?

tarafından

I don’t understand why I should buy it since the fan only runs at 2000 rpm, not the max 3600 rpm

tarafından

Yorum Ekle

Yanıtını ekle

theBreadCompany sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 61