İtibar: 67
4
2
Hi I have a iPhone 4s I'm currently rebuilding with new everything like housing screen and logic board but theres one problem I lost all my screws and I ordered replacement on ebay but they are mixed up in a baggy but how would Ik where they all would go and thanks.
Bu iyi bir soru mu?
İtibar: 1,8b
4
2
1
This is very hard. It’s insanely hard to recognize the screws. If you have a diagram that shows where they go,you may be able to judge the shortest from medium sized. Any holes that have the silver ring attached to the logic board are HIGH RISK. If you use too long of a screw,there’s a good chance it will dig into the board and cause long screw damage.
Its really a pain to organize mixed screws. You can look for diy information and see if it tells you which sizes go in which holes and use your best judgement,but know it’s risky if you mess up. I’m not exaggerating.
Good luck!
Bu yanıt yardımcı oldu mu?
Ok it is hard to recognize all them screws I'm still stuck on it and idk where I can find some diy information about it but do u know it's very difficult lol even rebuilding the iPhone but thanks
Son 24 Saat: 0
Son 7 gün: 1
Son 30 gün: 2
Her zaman: 35
