Ana içeriğe geç

4 Kasım 2017'de satışa sunulmuştur. Model A1865, A1901. GSM ya da CDMA olarak 64 ya da 256 GB kapasitelerinde, Gümüş ya da Uzay Grisi renklerinde satılır. ("iPhone 10" olarak da telaffuz edilir.)

1196 Soru Tümünü görüntüle

Help with problem detection - Rebooting after frame replacement

Hi, I have bad bluetooth, cellular and wifi signal. I bought Frame with few parts installed (buttons, bottom part -> taptic engine, speaker, 2 flex cables). When i put my motherbards and remaining parts into new frame phone starts noramlly but after 1-2 minutes of using it will reboot iteslf, and when it will turn on it will ask passowrd for the first unlock (not face id) as it should after reboot, but it wont ask SIM pin code, sim will unlock automatically withou pin. I switched few parts and problem can be only in frame itself, buttons (complete buttons with flex cable) and flex cable that have attached lightning port. What do you think? Which part is causing reboot problem? (i will go today on holiday and i need working phone, so i dont want to keep disassembling and assembling it to prevent damge).

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

I would start trouble shooting by disconnecting each flex in turn until the problem is resolved then replace the faulty part.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Johny sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 35