Ana içeriğe geç

An expansive variety of repair guides for electronic gear, ranging from home and car audio to calculators.

10707 Soru Tümünü görüntüle

Can you help me verift some components on the logic board?

Block Image

I have attached a picture of the circuit board of a toy car that makes an engine sound when it works, I marked 3 components on it. Can you help me identify those and what they do?

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

Apple Watch Kitleri

Screen and battery repairs just got easier.

Hemen Alışveriş Yapın

Apple Watch Kitleri

Screen and battery repairs just got easier.

Hemen Alışveriş Yapın

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

It would help if you explained what you were trying to accomplish, as well as adding a photo of the reverse side of the board. Nonetheless, here are my thoughts:

  1. The black blob on the left is a micro-controller that is covered with an epoxy. This will not be a traditional IC with markings, it will literally be the silicon die. Not much you can with that.
  2. The metallic probe on the right appears to be some kind of connection or perhaps a switch. To what purpose…who knows. You should be able to figure that out by looking at the toy car it came with. It could be for some kind of switch to activate the sound.
  3. The blob in the middle is a solder joint. Again, without a picture of the reverse side, it’s hard to know exactly what it’s purpose is. I suspect it is a third anchor point for the metallic probe on the right.

Bu yanıt yardımcı oldu mu?

Puan 3

Yorumlar:

Metal probe might also be a kind of holder for a cylindric heaven knows what..wheels axis ? In my days toy cars moved with an hand charged elastic :D

tarafından

Yorum Ekle

Yanıtını ekle

Sezgin Mustafa sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 11

Her zaman: 21