Ana içeriğe geç

21 Eylül 2018'de piyasaya sürüldü. A1921, A2101, A2102, A2104 Modelleri vardır. GSM veya CDMA / eSIM veya nano-SIM / 64, 256, veya 512 GB / Gümüş, Altın, ve Uzay Grisi seçenekleri mevcuttur. ("iPhone 10 S Max." olarak telaffuz edilir)

372 Soru Tümünü görüntüle

face id disabled by water through the bezel

My phone is having a problem with face ID it said move little lower and it is very frustrating but my proximity sensor, ambient ligth, front speakers and microphone is still working. I don’t think the flood illuminator , infrared camera and dot projector is not working.But when I use protrait mode in front camera it doesn’t change the stage ligth, stage ligth mono others also and when i use animoji it still works. How do i know my known my flood illuminator, infrared camera and dot projector is not working? If I change the flood iluminator will it work? And after trying to add face ID It said face ID is not available try setting up face ID later and I do not see the infrared light coming out from the flood illuminator.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
2 Yorum

hi @parimaibam

Can you please tell me if you have fixed this problem?

tarafından

same problem here

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Looks like you can check out the guide here as a reference.

Troubleshooting iPhone X Face ID Not Working 'Move iPhone a Little Lower/Higher'

Good luck bro!

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

If you’ve attempted replacement of the FaceID component, its possible that the secure enclave protection has kicked in. Replace it with the OEM part and continue troubleshooting from there.

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Can you further explain it to me ?

tarafından

Yorum Ekle

Yanıtını ekle

Parimanja Maibam sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 3,365