Ana içeriğe geç

Genel olarak, dahili bir ekran içermeyen ve sabit olması amaçlanan bilgisayarlar.

2106 Soru Tümünü görüntüle

My computer working but monitor no signal

I just built up a new computer. The motherboard, fans, CPU, GPU all working. Motherboard no error signal. But when I connected to monitor(DP), it no cable connected. I tried another monitor with HDMI, but also no signal.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

@bohaoz let us start with the make and model for your motherboard. Also, let us know if you are using a dedicated video card or how you connect your monitor to the computer.

tarafından

Yorum Ekle

4 Cevap

Filtre ölçütü:
Seçilen Çözüm

If you are sure all is working then BIOS is looking for incorrect video port as in VGA, HDMI, Display Port or DVI.

Depending on motherboard hold done the key for BIOS/UEFI.

It is <Del> on my Gigabyte one. Once in BIOS don’t use “Auto” for port but select the actual one.

That should do it. If not do the same on the monitor, as well, to manually match the port.

Funny, I was just having the same problem today. BIOS fixed mine.

Bu yanıt yardımcı oldu mu?

Puan 2

4 Yorum:

I didn’t change the port cos I couldn’t find it. But going into bios and exiting fixed it for me.

tarafından

How do you go in bios if you have no monitor?

tarafından

How do you go in Bios if output doesn’t work ?

tarafından

Hi @iphoneapple

Turn off computer. Try reseating graphics card and RAM. Remove the CMOS coin battery and connect the Clear CMOS jumper for a few seconds, remove jumper, re-insert coin battery, turn on monitor and power up computer. Did that work?

tarafından

Yorum Ekle
En Yararlı Yanıt

Hi @bohaoz

Do you have on-board video? You may need to connect the monitor to video outputs on the motherboard first to set-up the BIOS settings. In the settings, there is the ability to set the default video output to PCI GPU Graphics.

Be sure to check all power connections to the motherboard. It is easy to miss some small important connections that will make all the difference. Here is an excellent guide on further troubleshooting if needed.

Best of luck!

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

Hi, my CPU is i9900kf, no intel graphic

tarafından

Yorum Ekle

Maybe RAM. You can clean RAM

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I tried, but not working.

tarafından

Yorum Ekle

Is the monitor on the right setting! lol I’ve done that

Could be these types of hardware

PSU, orThe GPU is shorted not giving drawing enough power to display fans move looks as it is working

I would recommend trying reseating all connections 1st Starting with reseating Ram and make sure you have them placed in the correct slot Worked for me before

If not disconnect the hard drives boot to bios could be a windows drivers are corrupted

last but not least do the whole thing CPU reseat and all the connections full disassembly and reassembly if that doesn’t

USE PSU Tester and if its good it is your GPU failed

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

i tried. still not working

tarafından

Yorum Ekle

Yanıtını ekle

bohaoz sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 13

Son 7 gün: 78

Son 30 gün: 335

Her zaman: 20,795