Repair of the 1.2mm posts which hold a cover on the logic board
Hi
I dropped the phone a while ago and it would not come on at all I tried a display and battery from known working iPhone 5. Took the the phone to a phone shop guy was fantastic he said be careful next time i managed to solder it to work if you drop it again it may damage it again and i may not be able to solder it. I made the mistake of not asking what and where he soldered.
So my son who inherited the phone has dropped it and law and behold it is in the exact same state. Again tried a battery and display from a known working phone.
I have stripped the phone and have noticed two post are missing on the logic board. The posts are the ones which hold a metal cover over the display connectors three screws retain this cover 2 x 1.2mm and 1 x 1.6mm . the posts which have been torn off have left two circles i have gently scrapped both of them to expose any tracks one shows a circle shaped copper within the circle.
Could anyone provide any info can i just apply solder onto it to complete a circuit or do I need to complete a track ?
Any info greatly appreciated , phone has many images and videos which we would like to recover .
Bu iyi bir soru mu?