Ana içeriğe geç

Released in March 2017, the Moto G5 Plus (model numbers XT1687, XT1680, XT1684, XT1685) includes a 12.0 megapixel rear camera, a 5.2 inch screen with a 1920 x 1080 resolution, and the Android 7.0 (Nougat) operating system.

48 Soru Tümünü görüntüle

Charge cord on Moto G5 Plus overheated and charge port problem.

Moto G5 plus, phone end of the charge cord overheated, melted cord end and plastic around the charge port. (Using the Motorola turbo charger)

The connector has never seemed to seat properly in the charge port on the phone. It loses connection of the the cord or phone is jostled even slightly. Thinking there may be debris in the port I have attempted clean it out gently and with compressed air. That may have helped some, but only marginally if so.

Now the overheating.

I have connected a new cord, still a tenuous connection, and the phone is charging on turbo.

Any suggestions re: this problem are welcome.

Can the charge port be replaced and how difficult might that be? I have done screen, batter, etc. on several iPhone models. (using the very helpful guides here at iFixit)

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

You can replace the pcb that sells for $2.00 and some change. It comes with the USB port allready soldered on it… EnjoyEnjoy.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Gary Tash sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 51