İtibar: 67
4
2
ok so i have a 2007 macbook motherboard im gonna use it with a portable monitor so one thing i dont have a power button and some ppl said to me to solder a switch/button on the motherboard but i dont know where to solder one but thanks i appricaite the help
Bu iyi bir soru mu?
İtibar: 5,3b
23
14
22
For this model I believe the power on pads (marked with a power icon) are located below the fan:
You can just solder a basic button & two wires to those and you’re set.
Bu yanıt yardımcı oldu mu?
ok i never did this before lol so where could i get wires and what color could i use wires from a phone charger so lol im just trying to understand this correctly ok so i need wires and a button and then i need to solder the wires to the motherboard and then to the button and im all set
I'm just thinking you get a [button like this](https://www.amazon.com/Twidec-Normal-Mom...) and attach each wire to a pad. A bit pricey, too bad RadioShack went out of business lol — you've gotta be careful though, make sure you don't short out anything else on the board, it's small stuff you're working with.
@jonaharagon ok where does the red and black wire go on the pads or does it matter which side and also what side on the switch thanks
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 3
Her zaman: 862
