Eşyalarını Tamir Et Topluluk Mağaza

4-inch iPhone released in March 2016 with similar hardware specifications to the 6S. Available in Silver, Space Grey, Gold, or Rose Gold with 16/32/64/128 GB storage options. Model: A1662 and A1723

1049 Soru Tümünü görüntüle

Seçenekler

iPhone SE rear camera issue.

Hei.

Having issue with a rear camera and flashlight not working aswell. The front camera works nicely. The phone has a water damage history. Firstly the pp1v2_camera was missing so made a little jumper from PP1v2 line. PP1v8 line is present, also the i2c lines have 1,79 volts.

Only power what i am missing are the PP2v5 and PP2v85 but these are only present when camera is opened in phone - right ? The diode values didnt showed any short circuit to ground.

Also tried a new camera also - no luck... Any ideas ?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0

1 Yorum:

You need to confirm you have the PP2V rails while the camera app is open before you can trouble shoot any further. I know it is a pain trying to measure these. You might have to solder some wires to take the measurements.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Water damage—-the problem is where the water went. The *most likely* problem here is corrosion at the connector.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Hei,

Thanks for the reply. The connector seems OK when looking with microscope.

Does someone have SE rear camera FPC diode reading ? zxw unfortunatley does not have it.

tarafından

Yorum Ekle

Yanıtını ekle

Kaspar sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 73