Ana içeriğe geç

Mid 2009 Model A1278 / 2.26 or 2.53 GHz Core 2 Duo processor EMC 2326

745 Soru Tümünü görüntüle

Two layers to MB Pro 13" display glass?

The Product Overview for the MacBook Pro 13" Unibody (Mid 2009/Mid 2010) Front Display Glass says: "This part is the front half of the display glass only". I'm not sure what that means. My MB Pro's display works fine but the glass is broken. Are there two layers? I don't understand if I need another part beyond this one.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

it seems that there are two layers, if you take it in to an authorized Mac Service Provider just remember to specify that you want the "glass panel" replaced and NOT the LCD. Below is a video on how to do it, i STRONGLY recommend getting a professional to do this job, this is not a regular DIY. Not to mention finding a replacement glass yourself is not going to be an easy task as it is not a typical item. http://www.youtube.com/watch?v=H4LLOhLH2...

Bu yanıt yardımcı oldu mu?

Puan 2

2 Yorum:

I stand corrected! Here is a link from ifixit for a new display front glass

[bağlı ürün eksik veya kapalı: IF163-017]

Also here is their install guide, i still recommend taking it to a professional.

MacBook Pro 13" Unibody Mid 2009 Front Display Glass Replacement

tarafından

Thanks, Travers. I had found the iFixit glass display part, just wasn't clear if that was all I needed. I think it is. The video link you provided of the Small Dog Electronics technician removing the glass convinced me to try it. It really doesn't look that difficult, and with my glass already broken, I don't have to worry about breaking it! OTOH, that could make it difficult to get all the adhered pieces off. I saw other YouTubes that were good demonstrations of how NOT to do this repair!

tarafından

Yorum Ekle

Yanıtını ekle

dagnew sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 643